How to Repair Blown Off Roof Shingles

Roof shingles play a vital role in safeguarding your home from the harsh elements of nature. However, they can occasionally succumb to the forces of strong winds, storms, hail, or heavy snow, resulting in shingles getting blown off.

In such situations, it becomes imperative to address this issue promptly to prevent any further damage to your roof and, consequently, your home’s interior.

What You Need to Fix Your Roof Shingles

To fix your roof shingles that have flown away, you need some stuff like:

  1. Flat Pry Bar or Nail Puller: This helps you take off the bad shingles and the nails that are stuck there.
  2. Hammer: This is for nailing the new shingles to your roof. You need to nail them well and straight, so they don’t fall off again.
  3. Utility Knife: This is for cutting the new shingles to fit your roof. You may need to trim them a bit, depending on how big or small they are and what kind of shingles you have.
  4. Galvanized Roofing Nails: These are the nails you use to put the new shingles on your roof. They don’t rust or wear out, so they last longer and work better.
  5. Ladder: This is how you get up and down from your roof. You need a ladder that is strong, steady, and long enough to reach your roof safely. You also need to put it on a flat and solid ground, and make sure it doesn’t move when you use it.
  6. Matching Shingles: These are the new shingles you use to cover the gaps on your roof. You need to pick shingles that look like the ones you already have, so they don’t stand out and look weird.

Steps for Replacing a Shingle

To fix a roof shingle that has blown off, follow these steps:

  1. Take Off the Bad Shingle and Nails: Use the pry bar to carefully take off the bad shingle and any nails that are still on the roof.
  2. Put in the New Shingle: Put the new shingle under the one above it, being careful not to hurt or move the other shingles around it.
  3. Nail the New Shingle: Use roofing nails to nail the new shingle to your roof, making sure it matches with the other shingles next to it.
  4. Put Back Any Nails You Took Out: Put back any nails that you had to take out when you removed the bad shingle.
  5. Seal down new and surrounding shingles. This is to prevent wind from blowing off the new and adjoining shingles that have not had time seal down from the heat of the sun.
Video: Roof Repair : Repairing a damaged shingles

Detecting Signs of Blown-Off Roof Shingles

Several telltale signs can provide indications that your roof shingles have been blown off. These signs encompass:

  1. Missing Shingles: The most apparent sign is the absence of shingles in specific areas of your roof.
  2. Curled Shingles: Shingles that have curled at the edges due to wind damage can signal an issue.
  3. Cracked Shingles: Shingles exhibiting cracks or fractures are another sign of potential shingle displacement.
  4. Loose Shingles: Shingles that seem loosely attached or appear to have shifted from their original positions are cause for concern.

Upon observing any of these signs, it’s imperative to promptly conduct a thorough inspection of your roof to assess the extent of the damage.

Safety Precautions

Executing roof shingle repair demands stringent adherence to safety precautions, including:

  1. Protective Gear: Always wear safety goggles and gloves, especially when working on a ladder, to safeguard yourself from potential hazards.
  2. Ladder Safety: Exercise caution when using a ladder, avoiding overextension and ensuring it is placed on stable ground. Consider having a helper if repositioning the ladder becomes necessary.
  3. Safety Rope and Harness: A safety roap and harness properly anchored at the ridge line is always recommended to remain safe from fall danger.
  4. Weather Awareness: Never attempt repairs on a wet, icy, or slippery roof surface, as this presents a significant safety risk.

Risks Associated with DIY Roof Repair

While the allure of cost-effective DIY roof repair is undeniable, it comes with inherent risks. Inadequate knowledge and experience can lead to improper repairs, potentially exacerbating issues.

Shingles not installed correctly may succumb to future windstorms, leaks, or detachment.

Safety is paramount, especially when working in adverse weather conditions, making professional assistance a preferable choice.

Consider Upgrading Your Roof

Experiencing shingles blown off your roof could present an opportune moment to contemplate upgrading to superior roofing materials.

Transitioning from traditional asphalt shingles to resilient metal roofing can enhance your home’s ability to withstand challenging weather conditions, reduce energy consumption, and contribute to a more eco-friendly environment.

Moreover, a new roof installation can substantially elevate your home’s resale value, providing a commendable return on investment.


The duration of a roof repair job directly impacts the cost due to labor charges. Our average price per square foot for small repair is $48 per square foot. The price goes down after the first 25 square feet.

For more extensive projects, our charges are based on each 10-foot-by-10-foot patch of the roof. However, please note that any complicating factors that prolong the job could lead to additional charges.

Parting Words

Addressing the issue of blown-off roof shingles promptly and with precision is pivotal in safeguarding your home against potential water damage and associated problems.

While the allure of DIY repairs may be enticing, it’s essential to weigh the associated risks carefully.

Considering the benefits of professional roof repair and the potential for valuable upgrades can help you make an informed decision about the best course of action for your home’s roofing needs.

Scroll to Top

Get Your Free Report